So, I thought it was high time that I updated these instructions. Now, let me make it clear – people have been making dresses like these since forever and I certainly don’t claim these instructions as my own – in fact, many thanks go to Mama’s Doodles (whose “easy peasy” image I redrew for clarity) and Rostitchery (whose instructions I slightly modified) but I have presented them here because I know there are a lot of people looking for these online.
So without further ado…
The traditional method of making pillowcase dresses creates a drawstring casing around the child’s neck, which makes the dresses adjustable for a growing child. This method eliminates the drawstring casing which can be a choking hazard (using elastic instead) while preserving the adjustability of ties.
Start with one pillowcase, cleaned and pressed. You’ll also need 12″ of 1/2″ wide elastic, and one package of bias binding (you get this in the notions section of the fabric store–look for double fold binding tape) or 60” ribbon. You’ll need a couple of safety pins for threading your elastic. Extra rick rack or ribbon is required to decorate the lower edge of the dress (optional).
Full instructions are provided below but here is a quick summary diagram:
step 1 Measure your child from the shoulder to the desired length of the dress. measure this distance on your pillowcase from the open end, and cut straight across. this cut edge will be the top of the dress.
step 2 On each side of the pillowcase, at the cut edge, draw armscyes (that is the dressmaker term for armhole). The shape is like a letter “J” with the top of the J at the cut edge of the pillowcase. For a small child, it should be about 3″ deep, for a larger child make it 4″ deep.
step 3 Fold the two top edges 1/4″ to the inside and press (don’t worry about making it exact–just get close enough). fold down and press these edges again, this time 3/4″. Doing this double turn makes the finished edge neat. Stitch along the first fold, from one end to the other, forming a tunnel (this is known as a casing).
step 4 Cut your elastic into two 6″ pieces. Attach a safety pin to one end of one piece and use that to thread the elastic through one of the casings. As you thread the elastic, the casing will draw up, forming a stretchy neckline. You’ll need to pin the other end of the elastic when it gets to the casing so that it doesn’t come all the way out. Stitch across the open end of each casing to hold your elastic in place. Repeat with the other elastic and casing. stitch across the open end of each casing to hold your elastic in place.
www.dressestips.com
Hiç yorum yok:
Yorum Gönder